Kirkland, Washington
98033
tel: (425) 605-8500
fax: (801) 912-2645
sales@OrbOptronix.com
Download Specifications <ETΦ™ LED Characterization System
(Electrical-Thermal-Optical)
Designing products that use high
power
LEDs just got a whole lot
easier.
Features
- Complete Electrical-Thermal-Optical Data
- Automated Data Acquisition and Analysis
- Highly Accurate LED Spectral Measurements
- TEC Temperature Control and Monitoring
- DC and PWM Power Supply Control
- Vf and If 4-Wire Measurement
Orb Optronix released the first electro-thermal-optical characterization system in the world to allow fully automated spectral characterization of light emitting diodes (LEDs). The new ETΦ systems (also known as ETO) from Orb Optronix measure the spectral light output of light emitting diodes while precisely controlling electrical and thermal parameters.
In order to design systems that utilize high power LEDs, the light output characteristics (color and flux) must be known as a function of temperature and electrical input characteristics. ETO makes this fast in easy. Just load a high power LED or LED array, input test parameters ranges, hit start, and in less than an hour, you have all the data necessary to make fundamental design decisions regarding LED selection, thermal management, luminous efficacy, and more.
ETO LED Characterization System Configurations:
for discrete LED characterization to high-powered LED arrays
6” Pedestal System for discrete LED Characterization
Air Cooled 100cm2 platform for high-powered LEDs and LED array characterization
Liquid Cooled 100cm2 platform for high-powered LEDs and LED array characterization
ETO LED Characterization System Configurations
Thermal Platform Operating Range
Supported Source Meters
SpectralSuite™ Software Capabilities:
Complete test sequencing for automated control of current, temperature and spectral measurements. Complete data analysis capabilities for automatic graph generation.
Screen Shots
Applications
|
Design & Development of Products Using LEDs
Highly Accurate LED Measurements |
LED QA/ QC
LED Manufacturers and Distributors
|
Specifications
| Array Resolution | 1024 pixel (SP-50-VIS and SP-50-UV) |
| 2048 pixel (SP-50-NIR) | |
| Spectral Range | 380 to 780nm (SP-50-VIS) |
| 250 to 500nm (SP-50-UV) | |
| 360 to 1000nm (SP-50-NIR) | |
| Optical Bandwidth | 4.1 nm (SP-50-VIS and SP-50-UV) |
| 1.5 nm (SP-50-NIR) | |
| Wavelength Binning Resolution | 1 nm |
| Dynamic Range Resolution | 14 bit |
| Optical Input | SMA Fiber Connector |
| Typical Flux Measurement Range | 1 Lm to 100000 Lm |
| Wavelength Accuracy | ± 0.5 nm |
| Wavelength Repeatability | ± 0.2 nm |
| Stray Light | < 10-3 |
| Chromaticity Accuracy (x,y) | ± 0.002 |
| Chromaticity Repeatability (x,y) | ± 0.0005 |
| CCT Reproducibility | ± 20°K (Illuminant A) |
| Integration Time Range | 5 to 5,000 ms |
| ETO-06-01 Pedestal Dimensions HxWxL | 42.54cm x 32.38cm x 37.15cm |
| Instrument Case Dimensions HxWxL | 19.00cm x 53.34cm x 54.61cm |
| ETO-06-01 Pedestal Weight | ~9.9 kg |
| Instrument Case Weight | ~15.4 kg |
| Operating Environment | 10°C to 40°C and < 85% relative humidity |
| Interface | USB 2.0 |
| Power Supply | Choice of Keithley™ 2400 Series Models |
| Voltage Monitor 4-Wire | |
| Thermal Control Range | 0°C to 100°C, 2W to 50W |
| Additional options available (contact sales) | |
| Thermal Control Repeatability | +/- 0.5°C |
| Thermal Set-Point Resolution | 0.1°C |
| Interface | USB 2.0 Connectivity |
or email sales@orboptronix.com
